1970 Corvette Street Machine

-
Image
                 Street Freak Special ! This 1970 Corvette has such an outrageous custom paint job that it will blind you. The car is a time capsule bringing you back to 1975 when disco was popular, it also was a time when horsepower wasn't enough to win at shows so the people mixed street machine power with lowrider good looks. The Vette features a full custom interior, supercharged small block engine and a 4-speed manual transmission. The interior is filled with a roll bar, metallic vinyl interior accents and wood trim, finishing off the 70's vibe it rolls on classic wire wheels.     The engine is a small-block Chevy 400, with a Dyers 6V-71supercharger. It has a pump gas friendly 8.5:1 CR., The supercharger is feed by two boost-referenced Holley 650 CFM  carbs. Ignition is handled by a MSD products.  The small-block is backed up by a Muncie 4-speed manual transmission. The fumes exit in style with chrome 4-into one side pipes that make this 71' Corvette rumble. Power
Post a Comment

Performance Distributors

-

http://cdn.speednik.com/wp-content/blogs.dir/1/files/2013/05/performance_distributors_logo.jpg 

 

 


 

Performance Distributors is from Memphis, Tenn. They are  leading the way in performance and racing ignition system innovation. The (D.U.I.) Davis Unified Ignition and their Live Wire ignition wires are on vehicles worldwide. Their product development is a continuous process at Performance Distributors.

  Kelly Davis, the founder of Performance Distributors, is now run by his son Steve. Kelly Davis designed the industry’s first H.E.I. Performance Distributor.  He had a background in Drag Racing and Hot Rodding. Kelly mastered the science and art of setting advance curves. This unique science was passed on to Steve, and the company is now the most respected in the world for their advance curve technology.

 

This unit is for the Chrysler/Dodge 426 Hemi .

Some features include : 

Internal coil and Module, One wire hook-up , Custom Advance curve , Street/Strip up to 7000 RPM's ,  Racing version up to 10,000  RPM's

 

 

 

 

Some of their products include OEM upgrade kits,which include factory replacement coils and a complete pre-crimped wire sets with factory correct boots and wire separators. There is a choice of six wire colors to match your cars engine compartment.

 

This example is for a Ford Mustang with the 4.6 liter V8 Engine .

                                         Live Wires

Unlike universal plug wires sets, Live Wires do not require any assembly. All sets are custom fit and numbered on both ends for the correct cylinder making installation, removal and re-installation quick and easy. No cutting, splicing or crimping is required! All sets include a tube of dielectric grease that is applied to the plug boots to prevent voltage leakage and boots and terminals from sticking to the plug.


 

 The sleeving is made from a non-flammable heat treated glass braid, much like the type that is used on today’s ovens. This unique sleeving provides heat protection up to +1400° F and offers excellent resistance to moisture and chemicals. Inside this high temperature sleeve is an 8mm spiral core wire with a durable and lasting silicone jacket. The spiral core consists of a stainless steel wire wrapped around a magnetic core. This offers an extremely low resistance value of 300 – 350 Ohms per foot for optimum spark travel. Spiral core wire is also radio suppression, so there is no electronic interference with the radio and they work great with delay boxes and stutter boxes.

 

  Dyna- Batt           

   Lighten up your hot rod or race car by removing the heavy 40 lb battery and replacing it with Performance Distributors 13.5 lb Dyna-Batt!                    



The Dyna-Batt produces more power per pound than any battery on the market. It has the cranking power of wet cell batteries three times its size. This is due to the extremely low internal resistance which has been tested to crank engines with compression ratios as high as 15:1. The reserve capacity of the Dyna-Batt is 16 Amp Hours. It is complete dry cell design and can withstand the rigors of high performance and racing environments.  The Dyna -Batt has an excellent storage life and recharges very quickly. Any 12 volt charger can be used to recharge the Dyna-Batt . 

Performance Distributors has many more accessories on their web site visit :  performancedistributors.com

Call Steve Davis at :                            
(901) 396-5782

  Tell him you heard about their products here .   

                                                     

Comments

Post a Comment

Popular posts from this blog

What's in the Garage *Paul Kaufmann's 76 Arrow*

-
Image
  In this installment of What's in The Garage  we check out Paul Kaufmann's over the top Plymouth Arrow. What was once an old street race car from Detroit, it's now a Hemi powered street-machine that looks like noting else on the road.           This one is still in the garage but its about to break free. Ten years were spent on this build spanning over four states; New Jersey, Connecticut, Georgia and now Florida.    The story is extensive and Paul has many people to thank. Paul stated that this his first EFI project and its been a blast getting together. Lots of engineering went into planning and executing the build, he had two machinists, one body guy, one chassis shop, and an engine & transmission builder, the list goes on & on !     Paul states he is still wrapping up technical issues and getting ready for the road.   Paul stated that the street tires and wheelie bars don't jive but he had the chassis shop build them for him so he can get her on the
Click here to read this article»

Scott Robinson's "Bionic Wasp" 68' Camaro

-
Image
  Scott Robinson is from southern California and has been into cars his whole life, his earliest memories recount his time spent with his father and his friends. Scott's father raced all types of vehicles, drag boats, sand rails, and cars. These experiences made a major impression on Scott and he couldn't wait to be old enough to drive. When he was old enough, he got heavy into off-road motorcycles then when he got his driver's license all bets were off.  Scott forgot about racing motorcycles and went all in and started racing cars. The first car he raced wasn't car at all, it was a 1975 Chevy van. But this wasn't  any old worn out work van. This van belonged to Scott's father, it featured  a destroked 400 cube small-block built by Scott's Dad, it's backed up with a TH-400 automatic transmission and a narrowed 12-bolt rear end. Scott said it was fun ride for his first car, and when he graduated high-school his father gave it to him.   The father and son
Click here to read this article»

1962 Corvette Gasser

-
Image
    This 1962 Corvette Gasser was built to resemble the car Drag Racing legend Big John Mazmanian raced in the 60's. It was a four year no expense spared build,and features the best period correct parts that could be found or they were fabricated when they couldn't . The main attraction is the all aluminum 434 CID. Chevrolet small block . It's filled with a Lunati crank, CP Carillo connecting rods and swings Ross pistons. For the top end, a set of Bodix cylinder heads, which were fully ported and filled with Manley SS valves. For stellar performance , a Dyres 6-71 blower and a pair of 650 Holley double pumpers are mounted up top.   The owner stated that the combination is good for 650 Horsepower ! And it's street driven on 93 octane pump gas .   This is a factory 4-speed car,so it was natural to keep the manual transmission , the Corvette now features Hurst linkage and a Hurst shifter , power is applied through Lakewood-housing and Centerforce clutch . The interior feat
Click here to read this article»