Shop Tour - Hardcore Drag Racing

  This Ford Falcon is powered by the 4-decade built 302 cubic- inch small block . This engine has powered everything from Grandma's station wagon to Crown Victoria Police cars & F150 trucks. And it's painted a slick Candy Brandy-wine with a deep clear coat. It's equipped with a BDS 6/71 supercharger with dual 650 CFM Holley four barrel carburetors .  There are miles of  braided lines with AN fittings, a Milodon deep sump oil pan keeps the bottom end lubricated . The cooling system was upgraded with a Griffin aluminum radiator with a separate trans cooler, and electric fans. The biggest tube headers that would fit feed into a 3-inch  H-pipe dual exhaust that dumps out of the sides. The boosted muscle gets to the rear wheels through a heavy-duty B&M shifted C-4 three-speed automatic transmission that feeds the Ford 9-inch rear.    The 9-inch rear end  hangs on a set of ladder bars with adjustable coil overs, and meaty Hoosier tires make sure...

                                                      As far as the records show,Dodge only built  150 examples of the L023 Monsters !   Previously owned by Lou Mancini of Mancini Racing, and an Original Grand Spaulding car autographed by Mr. Norm. Possibly one of the most original LO23 Hemi Darts in existence with only 3,799 miles on the clock. Built at the Hamtramck, Michigan plant then sent to Hurst Performance for the final conversion with the under rated 426/425 HP race Hemi engine. Shipped from Chrysler’s Marine and Industrial Division,the unique 426 HEMI engines had been built offline by hand-picked technicians. The HEMI blocks were iron with a 4.250-inch bore and a 3.750-inch stroke,12.5:1 compression and aluminum heads. It features a magnesium Cross- Ram intake manifold with two big Holley Carb's,...

    I bet you would never miss a day of school if your bus looked like this ! This was seven year custom build with  no expense spared. The body went through a frame-off restoration . For power a 355 C.I. small block Chevy is equipped with a Blower Shop 8-71 supercharger .  Mixing the go juice is a pair of  Edelbrock carburetors topped off with a MR.Gasket scoop . The exhaust exits the aluminum heads through  Hedman Headers and flow through three inch tubing ending at the rear bumper.  A Turbo-400 automatic transmission handles the gear shifts .       Modern touches include power steering, & power disk brakes.    The interior features gray tweed upholstery, a Vintage Air hvac- system has been hidden . Classic Instruments gauges fill the factory dash board , while a tilt steering column and vintage looking steering wheel blend form and function.                ...

                                                           This Chevelle has been featured in 2 magazines and won over 100 awards ! The low profile hood scoop that is on the car is functional and feeds a built 402 cubic inch engine that was Dyno tested at 475 horsepower. All that muscle is backed up with  a TCI 700-R4 that is rated for 650 horsepower, so it can handle whatever the big-block can throw at it. The engine features a Holley 750CFM Double-Pumper and a full roller valve-train by Comp . The B&M shifted 4-speed automatic transmission features a 2,400 stall converter . Power is then sent out to a narrowed 12-bolt rear end with an Eaton posi and 4.11 gears. Ladder bars & coil-over shocks  keep the rear- end planted.      The interior features racing style bucket seats with harnesses...

  This 1967 Chevrolet Chevelle is powered by a 496 C.I. big-block with Brodix aluminum heads and forged Eagle rotating asembly. A full roller valve-train from Comp lets the boost in . A Holley Dominator Cpu. controls the fuel injection system .  The fully polished Weiand 8-71 supercharger pokes through the hood and it's topped off with a Big & Ugly injector hat that draws your attention to the big Rat motor . Backing up the big- block is a 4L80E equipped with Trans- brake and 3200 stall converter.  Power is sent to a Mark Williams Ford 9- inch rear end with 4:88 gears and a spool. This car was built to be street friendly.  On super unleaded, this Chevelle produces 600 H.P. to the rear wheels but will make 1,000+ horsepower tuned on race gas.  Stopping this beast is 4-wheel disc brake system by Wilwood .   Other upgrades include a 10 point roll cage, along with five point race harnesses keeping the passengers safe.   The transmission is co...

    The Wicked 1 is a 1948 Anglia two-door sedan owned by Gerard Milidantri from Suffern, New York.  He’s a general manager of an aerospace company that overhauls turbine engines and on the weekends he runs the Anglia at South East Gasser events.   The club brings back  Drag Racing from the late sixties and the cars must have period correct parts that you could buy up until 1967 and no later . No modern electronics , no automatics, no electronic fuel injection . Only open headers & a 4-speed , perfect for wheels up launches. We caught up with The Wicked 1 & Gerard at Island Dragway in Great Meadows , New Jersey.   This Anglia was hand-built in Pennsylvania in the late sixties by a fellow named GK Bernard. It was later purchased by SEGA emcee Quain Stott .   At a SEGA event in 2019 it was the first time Gerard had seen the Anglia, and it made such an impression that he sold the his Corvette and decided to pursue SEGA racing. In 2021...

  Don't let this happen to you , make sure the person selling/building your parts has experience ! Published on December 3, 2021 By, Mike Salemme     I want to share some thoughts about the job market in the automotive industry today. This is a story of what happened to me this week .   It concerns me very much not only from a Technicians view but also from a human safety view as well . Cars and trucks are deadly weapons and when I work on a car before and after a repair I think to myself is this car safe to return to a customer ?  When you bring in your car/truck for service do you consider how much experience the Technician has and do you feel comfortable about it . How much experience do you think a person should have before you trust them to work on your car ? I would say I would want a technician to have at least 5 years behind them to do just an oil change on my car . (That would never happen because I do my own repairs) .   Or do y...

        This pro-built 1998 Chevrolet Camaro was built for the popular X-275 class as well as Grudge type racing. It features a 5.3 Liter Gen-4 iron block filled with Wiseco forged pistons, Molnar connecting rods, King bearings and it's held together with ARP bolts & studs. The valve train starts  with a trick turbo spec. camshaft.  On the induction side there is a single 88 MM X275 class legal Precision  turbo blowing into a Holley EFI single-plane intake manifold equipped with a 102 MM throttle body. Engine management is controlled by a Holley Terminator-X system , while an Aeromotive pump and 210 lb injectors supply the go juice. The Camaro is estimated to have 1200-1300 H.P. at the crank,and yet it remains street legal .    The power is sent to the Strange 12 bolt  rear end through a two-speed Powerglide with a Reid case filled with a 1.80 first gear, the 4000 RPM billet converter and it's controlled by a Precision Products shift...